Your repair estimate is the most important number in a flip. If it is too low, your profit disappears. If you build it carefully, you can make an offer with confidence. This guide shows a simple, repeatable way to do it.

Price every item in two parts

For each repair, set two prices: one for material and one for labor. Then multiply by the quantity. Material is what you buy. Labor is what you pay someone to install it.

Each item is priced by a unit that fits the work:

  • Each, for things you count, like a window or a water heater.
  • Square foot, for floors and roofs.
  • Linear foot, for trim and fencing.
  • Square foot of wall, for paint and drywall.

The formula is: quantity times (material price plus labor price) equals the line total.

Sort every line into four buckets

Buckets keep an estimate readable and show you where the money goes.

  • Interior: kitchen, bathroom, flooring, paint, and demolition.
  • Exterior: roofing, exterior work, windows and doors, and siding.
  • Systems: HVAC, plumbing, and electrical.
  • Other: permits, dumpster, cleaning, contingency, and anything else.

Walk the house with a plan

Go room by room in the same order every time, so you never skip a space. Start outside with the roof, siding, windows, and drainage. Move inside and check each room. Then check the systems: furnace, water heater, panel, and visible plumbing. Take notes and photos as you go.

Write down a quantity for everything, even if it is a guess. Measure rooms for flooring and count the windows. A vague note like "needs flooring" is not an estimate. "1,100 square feet of vinyl plank" is.

Anything you cannot see, like pipes in walls or the inside of a roof, is a risk. That is what contingency is for.

Add a contingency

Contingency is a cushion for surprises. Old houses hide problems. A common starting point is 10% of the repair subtotal. A house you could not fully inspect may deserve more. The cushion is cheap compared with a deal that loses money.

Worked example: a 1,400 square foot house

This is an example with round numbers, not a quote. Your prices will differ by market.

BucketLineQtyMaterialLaborTotal
InteriorDemolition and haul-out (sq ft)1,400$0.50$1.50$2,800
InteriorKitchen cabinets and counters (each)1$4,500$2,500$7,000
InteriorBathroom update (each)2$1,800$1,700$7,000
InteriorVinyl plank flooring (sq ft)1,100$3.00$2.50$6,050
InteriorInterior paint (sq ft of wall)3,200$0.60$1.40$6,400
ExteriorRoofing (sq ft)1,600$2.00$2.50$7,200
ExteriorWindows (each)8$300$150$3,600
SystemsHVAC replacement (each)1$3,500$2,500$6,000
SystemsPlumbing repairs (each)1$600$900$1,500
SystemsElectrical fixtures and outlets (each)1$800$1,200$2,000
OtherPermits (each)1$0$800$800
OtherDumpster (each)2$450$0$900
BucketSubtotal
Interior$29,250
Exterior$10,800
Systems$9,500
Other$1,700
Subtotal$51,250
Contingency (10%)$5,125
Rehab estimate$56,375

Feed the total into the deal

The estimate total becomes the Rehab number in your deal math. It matters a lot. On a $250,000 ARV with default costs and minimums, a $56,375 rehab means the best price that passes every check is about $133,000. With a $40,000 rehab, it was about $149,400. A $16,375 rehab difference moved the offer by about the same amount.

Common mistakes

  • Pricing labor and material as one lump sum, so you cannot see what changed.
  • Skipping the small items: permits, dumpster, cleaning, and trim.
  • Guessing quantities instead of measuring.
  • Using no contingency, or cutting it to make the deal look better.
  • Using prices from another city or another year.

How GenesisOS does it

The Estimator has a Cost Library. Each item holds a Material price and a Labor price per "Priced By" unit: each, square foot, linear foot, or square foot of wall. Categories include Kitchen, Bathroom, Flooring, Paint, Roofing, HVAC, Plumbing, Electrical, Exterior, Windows & Doors, Siding, Demolition, and Other. Every line rolls into Interior, Exterior, Systems, or Other.

Assemblies turn one number, like square footage or the number of windows, into a full list of lines. The company-wide Contingency % defaults to 10% and is added on top. The total feeds the Rehab input on the deal. Starter prices are rough placeholders, so edit them to your market. An estimate belongs to one deal analysis and is locked once a Rehab Project is started from it.

Key takeaways

  • Price material and labor separately, then multiply by a real quantity.
  • Use four buckets so you can see where the money goes.
  • Add a contingency, 10% by default.
  • The total becomes the deal's Rehab input, so it directly moves your top offer.